Physico-mechanical characteristics of biomaterial patches for numerical modeling problems
Onishchenko P. S.1, Glushkova T. V.1, Kostyunin A. E.1, Rezvova M. A.1, Barbarash L. S.1
1Federal State Budgetary Scientific Institution Research Institute for Complex Issues of Cardiovascular Diseases, Kemerovo, Russia
Email: onis.pavel@gmail.com
A full-scale study of the physical and mechanical properties of a number of samples of commercial biomaterials-patches was carried out. It is shown that all materials have a pronounced non-linearity of behavior, manifested in the presence of an initial gentle stress section with a subsequent increase in stiffness, however, there are quantitative differences in the length of these sections and, accordingly, in the final characteristics: tensile strength, elongation at break, elasticity. The results of numerical verification of the obtained coefficients of hyperelastic materials models showed high convergence with the results of field tests. Keywords: numerical modeling, physical and mechanical tests, hyperelastic material model, polynomial approximation.. Keywords: numerical simulation, physical and mechanical testing, hyperelastic material model, polynomial approximation.
- E.A. Ovcharenko, K.Yu. Klyshnikov, T.V. Glushkova, L.S. Barbarash. Kompleksnye problemy serdechno-sosudistykh zabolevanij, 5 (1), 6 (2016) (in Russian)
- I.Yu. Zhuravleva, D.V. Nushtaev, K.V. Ardatov, R.M. Sharifulin, A.V. Afanasiev, A.V. Bogachev-Prokofiev. Rossijskij zhurnal biomekhaniki, 23 (4), 599 (2019) (in Russian). DOI: 10.15593/RZhBiomeh/2019.4.11
- Y. Dabiri, J. Ronsky, I. Ali, A. Basha, A. Bhanji, K. Narine. Cardiovascular Engineering and Technology, 7 (4), 363 (2016). DOI: 10.1007/s13239-016-0279-5
- C. Martin, W. Sun. Biomechanics and Modeling in Mechanobiology, 13, 759 (2014). DOI: 10.1007/s10237-013-0532-x
- S. Duczek, U. Gabbert. Fundamental Principles of the Finite Element Method, pp. 63-90, in R. Lammering, U. Gabbert, M. Sinapius, Th. Schuster, P. Wierach (editors). Lamb-Wave Based Structural Health Monitoring in Polymer Composites (Springer, 2017), DOI: 10.1007/978-3-319-49715-0_4
- E.A. Ovcharenko, K.Yu. Klyshnikov, G.V. Savrasov, A.V. Batranin, V.I. Ganyukov, A.N. Kokov, D.V. Nushtaev, V.Yu. Dolgov, Yu.A. Kudryavtseva, L.S. Barbarash. Sovremennye tekhnologii v meditsine, 8 (1), 82 (2016) (in Russian). DOI: 10.17691/stm2016.8.1.11
- N. Farahani, A. Braun, D. Jutt, T. Huffman, N. Reder, Z. Liu, Y. Yagi, L. Pantanowitz. J. Pathology Informatics, 8 (1), 36 (2017). DOI: 10.4103/jpi.jpi_32_17
- W. Wu, Z. Han, B. Hu, C. Du, Z. Xing, C. Zhang, J. Gao, B. Shan, C. Chen. Annals of Translational Medicine, 9 (2), 169 (2021). DOI: 10.21037/atm-20-2451
- E.A. Ovcharenko, K.Yu. Klyshnikov, T.V. Glushkova, A.Yu. Burago, I.Yu. Zhuravleva. Tekhnologii zhivykh sisyem, 11 (6), 43 (2014) (in Russian)
- V. Karade, B. Ravi. Intern. J. Computer Assisted Radiology and Surgery, 10 (4), 473 (2015). DOI: 10.1007/s11548-014-1097-6
- A. Kulikajevas, R. Maskeliunas, R. Damav seviv cius, S. Misra. Sensors, 19 (7), 1553 (2019). DOI: 10.3390/s19071553
- S.S. Lashkarinia, S. Piskin, T.A. Bozkaya, E. Salihoglu, C. Yerebakan, K. Pekkan. Annals of Biomedical Engineering, 46 (9), 1292 (2018). DOI: 10.1007/s10439-018-2043-5
- C. Capelli, E. Sauvage, G. Giusti, G.M. Bosi, H. Ntsinjana, M. Carminati, G. Derrick, J. Marek, S. Khambadkone, A.M. Taylor, S. Schievano. Interface Focus, 8 (1), 20170021 (2018). DOI: 10.1098/rsfs.2017.0021
- M. Urbano, F. Auricchio. J. Functional Biomaterials, 6 (2), 398 (2015). DOI: 10.3390/jfb6020398
- M. Jaskari, S. Ghosh, I. Miettunen, P. Karjalainen, A. Jarvenpaa. Materials, 14 (19), 5809 (2021). DOI: 10.3390/ma14195809
- E.A. Ovcharenko, K.U. Klyshnikov, A.E. Yuzhalin, G.V. Savrasov, T.V. Glushkova, G.U. Vasukov, D.V. Nushtaev, Y.A. Kudryavtseva, L.S. Barbarash. Intern. J. Biomed. Engineer. Technol., 25 (1), 44 (2017). DOI: 10.1504/IJBET.2017.086551
- F. Sulejmani, A. Caballero, C. Martin, T. Pham, W. Sun. J. Mechanical Behavior of Biomedical Materials, 97, 159 (2019). DOI: 10.1016/j.jmbbm.2019.05.020
- K. Murdock, C. Martin, W. Sun. J. Mechanical Behavior of Biomedical Materials, 77, 148 (2018). DOI: 10.1016/j.jmbbm.2017.08.039
- P.P. Caimmi, M. Sabbatini, L. Fusaro, A. Borrone, M. Cannas. J. Cardiac Surgery, 31 (8), 498 (2016). DOI: 10.1111/jocs.12799
- GOST ISO 37-2020. Rezina i termoplasty. Opredelenie uprugoprochnostnykh svojstv pri rastyazhenii. Date of introduction 2022-01-01-URL: https://docs.cntd.ru/document/573103853 (date of access: 05.06.2022) (in Russian)
- A. Rassoli, N. Fatouraee, R. Guidoin, Z. Zhang. Artificial Organs, 44 (3), 278 (2020). DOI: 10.1111/aor.13552
- Yu.N. Zakharov, V.G. Borisov, R.Yu. Lider, A.N. Kazantsev, N.N. Burkov, M.S. Bayandin, A.I. Anufriev. Khirurgiya. Zhurn. im. N.I. Pirogova, 6, 71 (2020). (in Russian) DOI: 10.17116/hirurgia202006171
- R.A. Vinogradov, Yu.N. Zakharov, V.G. Borisov, M.A. Chernyavsky, V.N. Kravchuk, D.V. Shmatov, K.P. Chernykh, A.N. Kazantsev, A.A. Sorokin, G.Sh. Bagdavadze, S.V. Artyukhov, G.G. Khubulava. Neotlozhnaya meditsinskaya pomosch. Zhurn. im. N.V. Sklifosovskogo, 10 (2), 401 (2021). (in Russian) DOI: 10.23934/2223-9022-2021-10-2-401-407
- A. Caballero, F. Sulejmani, C. Martin, T. Pham, W. Sun. J. Mechanical Behavior of Biomedical Materials, 75, 486 (2017). DOI: 10.1016/j.jmbbm.2017.08.013
- E.A. Ovcharenko, K.Yu. Klyshnikov, T.V. Glushkova, D.V. Nushtaev, Yu.A. Kudryavtseva, G.V. Savrasov. Meditsinskaya tekhnika, 293 (5), 1 (2015) (in Russian)
- C. Paz, E. Suarez, A. Cabarcos, S.I.S. Pinto. Computer Methods and Programs in Biomedicine, 206, 106148 (2021). DOI: 10.1016/j.cmpb.2021.106148
- X. Chen, J. Zhuang, H. Huang, Y. Wu. Scientific Reports, 11 (1), 4803 (2021). DOI: 10.1038/s41598-021-84155-3
- G. Biglino, C. Capelli, J. Bruse, G.M. Bosi, A.M. Taylor, S. Schievano. Heart, 103 (2), 98 (2017). DOI: 10.1136/heartjnl-2016-310423
- R. Zakerzadeh, M.-C. Hsu, M.S. Sacks. Expert Review of Medical Devices, 14 (11), 849 (2017). DOI: 10.1080/17434440.2017.1389274
- A.A. Rostam-Alilou, H.R. Jarrah, A. Zolfagharian, M. Bodaghi. Biomechanics and Modeling in Mechanobiology, 2022. DOI: 10.1007/s10237-022-01597-y
- J. Dong, Z. Sun, K. Inthavong, J. Tu. Computer Methods in Biomechanics and Biomedical Engineering, 18 (14), 1500 (2015). DOI: 10.1080/10255842.2014.921682
- J. Liu, W. Yang, I.S. Lan, A.L. Marsden. Mechanics Research Communications, 107, 103556 (2020). DOI: 10.1016/j.mechrescom.2020.103556
- H. Li, K. Lin, D. Shahmirzadi. Biomedical Engineering and Computational Biology, 7, BECB.S40094 (2016). DOI: 10.4137/BECB.S40094
- H. Esmaeili Monir, H. Yamada, N. Sakata. Computer Methods in Biomechanics and Biomedical Engineering, 19 (12), 1286 (2016). DOI: 10.1080/10255842.2015.1128530
- L. Cai, Y. Wang, H. Gao, X. Ma, G. Zhu, R. Zhang, X. Shen, X. Luo. Scientific Reports, 9 (1), 12753 (2019). DOI: 10.1038/s41598-019-49161-6
- M. Hirschhorn, V. Tchantchaleishvili, R. Stevens, J. Rossano, A. Throckmorton. Medical Engineering Physics, 78, 1 (2020). DOI: 10.1016/j.medengphy.2020.01.008
- H. Tam, W. Zhang, D. Infante, N. Parchment, M. Sacks, N. Vyavahare. J. Cardiovascular Translational Research, 10 (2), 194 (2017). DOI: 10.1007/s12265-017-9733-5
- M.S. Sacks, C.J. Chuong. Annals of Biomedical Engineering, 26 (5), 892 (1998). DOI: 10.1114/1.135
- P. Aguiari, M. Fiorese, L. Iop, G. Gerosa, A. Bagno. Interactive CardioVascular and Thoracic Surgery, 22 (1), 72 (2016). DOI: 10.1093/icvts/ivv282
- E. Remi, N. Khelil, I. Di, C. Roques, M. Ba, F. Medjahed-Hamidi, F. Chaubet, D. Letourneur, E. Lansac, A. Meddahi-Pelle. Biomaterials Science and Engineering (InTech, 2011), DOI: 10.5772/24949
Подсчитывается количество просмотров абстрактов ("html" на диаграммах) и полных версий статей ("pdf"). Просмотры с одинаковых IP-адресов засчитываются, если происходят с интервалом не менее 2-х часов.
Дата начала обработки статистических данных - 27 января 2016 г.