Technical Physics Letters
To authors
Volumes and Issues
- 2025
- 2024
- 2023
- 2022
Influence of Cr content in TiCrN coatings obtained by vacuum arc deposition on their phase composition, structure and properties
Leonov A. A.
1, Denisova Yu. A.
1, Denisov V. V.
1, Syrtanov M. S.
1,2
1Institute of High Current Electronics, Siberian Branch, Russian Academy of Sciences, Tomsk, Russia
2Tomsk Polytechnic University, Tomsk, Russia
2Tomsk Polytechnic University, Tomsk, Russia
Email: laa-91@yandex.ru, yukolubaeva@mail.ru, volodyadenisov@yandex.ru, maxim-syrtanov@mail.ru
The TiCrN coatings were deposited on Cr12MoV die steel using the vacuum-arc plasma-assisted method at different values of the chromium cathode arc current (40, 60, 80 and 100 A). It was found that an increase in the chromium cathode arc current leads to an increase in the relative chromium content in the coatings from 0.26 to 0.52; an increase in the content of the (Ti, Cr)N phase from 18.3 to 94.2 %; a decrease in the coherent scattering regions size from ~ 30-40 to ~ 5 nm; an increase in the microstrains of crystal lattices from (0.8-1.6)· 10-3 to (10-11.1)· 10-3. The Ti0.54Cr0.46N coating had the highest mechanical (hardness H=37.4 GPa, ratio of hardness and elastic modulus H3/E2=0.30 GPa) and tribological (friction coefficient μ=0.512) characteristics among the studied coatings. Keywords: vacuum arc deposition, TiCrN coatings, phase composition, mechanical properties.
- A.I. Men'shakov, D.R. Emlin, Tech. Phys. Lett., 47, 511 (2021). DOI: 10.1134/S1063785021050254
- T. Narayana, S.S. Saleem, Trib. Int., 193, 109348 (2024). DOI: 10.1016/j.triboint.2024.109348
- A. Vorontsov, A. Filippov, N. Shamarin, E. Moskvichev, O. Novitskaya, E. Knyazhev, Yu. Denisova, A. Leonov, V. Denisov, S. Tarasov, Metals, 12 (10), 1746 (2022). DOI: 10.3390/met12101746
- A. Filippov, A. Vorontsov, N. Shamarin, E. Moskvichev, O. Novitskaya, E. Knyazhev, Yu. Denisova, A. Leonov, V. Denisov, S. Tarasov, Metals, 12 (12), 2046 (2022). DOI: 10.3390/met12122046
- A.A. Leonov, Yu.A. Denisova, V.V. Denisov, M.S. Syrtanov, A.N. Shmakov, V.M. Savostikov, A.D. Teresov, Coatings, 13 (2), 351 (2023). DOI: 10.3390/coatings13020351
- G. Mendoza-Leal, C. Hernandez-Navarro, J. Restrepo, M. Flores-Martinez, E. Rodri guez, E. Garci a, MRS Adv., 3, 3675 (2018). DOI: 10.1557/adv.2018.605
- S. Mohapatra, M.-S. Oh, Appl. Sci., 15 (5), 2466 (2025). DOI: 10.3390/app15052466
- O.I. Posylkina, S.D. Latushkina, I.A. Sechko, A.A. Vozniakovskii, E.A. Bogacheva, Tech. Phys., 70 (2), 255 (2025). DOI: 10.61011/TP.2025.02.60822.296-24
- V.M. Savostikov, Yu.A. Denisova, V.V. Denisov, A.A. Leonov, S.V. Ovchinnikov, M.V. Savchuk, Russ. Phys. J., 64, 2219 (2022). DOI: 10.1007/s11182-022-02580-x
- K.H. Lee, C.H. Park, Y.S. Yoon, J.J. Lee, Thin Solid Films, 385 (1-2), 167 (2001). DOI: 10.1016/S0040-6090(00)01911-8
- C.X. Tian, Ch. Zou, Z.S. Wang, B. Yang, D.J. Fu, V.O. Pelenovich, A. Tolstogouzov, Int. J. Nanosci. Nanotechnol., 16 (4), 259 (2020). https://www.ijnnonline.net/article_47980.html
- A.D. Pogrebnjak, V.M. Beresnev, O.V. Bondar, Ya.O. Kravchenko, B. Zhollybekov, A.I. Kupchishin, Tech, Phys. Lett., 44 (2), 98 (2018). DOI: 10.21883/PJTF.2018.03.45575.16826 [A.D. Pogrebnjak, V.M. Beresnev, O.V. Bondar, Ya.O. Kravchenko, B. Zhollybekov, A.I. Kupchishin, Tech. Phys. Lett., 44 (2), 98 (2018). DOI: 10.1134/S1063785018020098]
- B.D. Beake, Surf. Coat. Technol., 442, 128272 (2022). DOI: 10.1016/j.surfcoat.2022.128272]
- H.M. Cao, X. Zhou, X.Y. Li, K. Lu, Trib. Int., 115, 3 (2017). DOI: 10.1016/j.triboint.2017.05.027]
- C.D. Rivera-Tello, E. Broitman, F.J. Flores-Ruiz, J. Perez-Alvarez, M. Flores-Jimenez, O. Jimenez, M. Flores, Coatings, 10 (3), 263 (2020). DOI: 10.3390/coatings10030263
Подсчитывается количество просмотров абстрактов ("html" на диаграммах) и полных версий статей ("pdf"). Просмотры с одинаковых IP-адресов засчитываются, если происходят с интервалом не менее 2-х часов.
Дата начала обработки статистических данных - 27 января 2016 г.