Technical Physics
To authors
Volumes and Issues
- 2024
- 2023
- 2022
Influence of graphene additives on dynamic strength and failure of alumina under shock loading
The results of dynamic testing of alumina samples with different graphene content are presented. The tests were carried out using a split Hopkinson rod according to the "Brazilian test" method at an impact speed of 10 m/s. The optimal value of the graphene content was obtained. The strength characteristics of the alumina nanocomposite with graphene reach a maximum at this value. Keywords: ceramic composite, graphene, split Hopkinson rod, Brazilian test.
- D. de Faoite, D.J. Browne, F.R. Chang-Di az, K.T. Santon. J. Mater. Sci., 47 (10) (2012)
- A.V. Nomoev. Pis'ma v ZhTF, 36 (21), 46 (2010) (in Russian)
- A.M. Bragov, V.N. Chuvil'deev, V.N. Melekhin, M.S. Boldin, V.V. Balandin, A.V. Nokhrin, A.A. Popov. PMTF, 61 (3), 207 (2020) (in Russian)
- A. Centeno, V.G. Rocha, B. Alonso, A. Fernandez, C.F. Gutierrez-Gonzalez, R. Torrecillas, A. Zurutuza. J. Eur. Ceram. Soc., 33, 3201(2013)
- B. Lee, M.Y. Koo, S.H. Jin, K.T. Kim, S.H. Hong. Carbon, 78, 212 (2014)
- M.S. Boldin, N.V. Sakharov, S.V. Shotin, V.N. Chuvil'deev, A.V. Nokhrin, D.N. Kotkov, A.V. Pisklov. Vestnik Nizhegorodskogo un-ta im. N.I. Lobachevskogo, 6 (1), 32 (2012) (in Russian)
- V.R. Akhil Raj, K. Hadagalli, P. Jana. J. Mater. Eng. Perform, 30, 1234 (2021)
- H.J. Kim, S.-M. Lee, Y.-S. Oh, Y.-H. Yang, Y.S. Lim, D.H. Yoon, Ch. Lee, J.Y. Kim, R.S. Ruoff. Sci. Rep., 4, 5176 (2014)
- A. Borrell, R. Torrecillas, V.G. Rocha, A. Fernandez. Wear, 274, 94 (2012)
- S. Stankovich, D.A. Dikin, G.H. Dommett, K.M. Kohlhaas, E.J. Zimney, E.A. Stach, R.D. Piner, S.T. Nguyen, R.S. Ruoff. Nature, 442, 282 (2006)
- Y.B. Adebayo, G.I. Douglas. J. Mater. Sci., 36 (20), 4995 (2001)
- R. Azarafza, A. Arab, A. Mehidpoor. Intern. J. Adv. Design and Manufactur. Technol., 5 (5), 83 (2012)
- V.Yu. Goltsev, A.V. Osintsev, A.S. Plotnikov. Lett. Mater., 7 (1), 21 (2017)
- Q.Z. Wang, X.M. Jia, S.Q. Kou, Z.X. Zhang, P.A. Lindgvist. J. Rock Mechanics and Mining Sciences, 41 (2), 245 (2004)
- ASTM D3967-95a. Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
- T. Rodriguez, C. Navarro, V. Sanchez-Galvez. J. Physique, IV, 101 (1994)
- A.V. Kuznetsov, V.A. Morozov, G.G. Savenkov, V.V. Stolyarov. ZhTF, 91 (3), 484 (2021) (in Russian). DOI: 10.21883/TP.2022.06.54417.47-22 [A.V. Kuznetsov, V.A. Morozov, G.G. Savenkov, V.V. Stolyarov. Tech. Phys., 66 (3), 470 (2021). DOI: 10.1134/S1063784221030154]
- D. de Faoite, D.J. Browne, F.R. Chang-Diaz, K.T. Santon. J. Mater. Sci., 47 (10), 4211 (2012)
- A.S. Kashin, V.P. Ananikov. Russ. Chem. Bull., 60, 2602 (2011)
- A.M. Bragov, A.K. Lomunov. Ispol'zovanie metoda Kol'skogo dlya issledovaniya protsessov vysokoskorostnogo deformirovaniya materialov razlichnoi fizicheskoi prirody. (Izd-vo Nizhegorodskogo un-ta, Nizhniy Novgorod, 2017) (in Russian)
- B. Lee, M.Y. Koo, S.H. Jin, K.T. Kim, S.H. Hong. Carbon, 78, 212 (2014)
- A.M. Bragov, A.K. Lomunov, D.A. Lamzin, A.Yu. Konstantinov. Continuum Mech. Thermodyn., (2019). DOI: 10.1007/s00161-019-00776-0
- E.A. Klyatskina, A. Borrell, E.G. Grigoriev, A.G. Zholnin, M.D. Salvador, V.V. Stolyarov. J. Ceram. Soc. Tech., 9 (3), 215 (2018)
- H. Porwal, P. Tatarko, S. Grasso, J. Khaliq, I. Dlouhy, M.J. Reece. Carbon, 64, 359 (2013)
- Ya.B. Fridman. Mekhanicheskie svoistva metallov. Ch. 2. Mekhanicheskie ispytaniya. Konstruktsionnaya prochnost' (Mashinostroenie, M., 1974) (in Russian).
Подсчитывается количество просмотров абстрактов ("html" на диаграммах) и полных версий статей ("pdf"). Просмотры с одинаковых IP-адресов засчитываются, если происходят с интервалом не менее 2-х часов.
Дата начала обработки статистических данных - 27 января 2016 г.