The effect of ultrasound frequency on the physical and mechanical properties of carbon fiber reinforced plastic formed using the layer-by-layer fusion bonding technology
Zlobina I.V.
1,2, Bekrenev N.V.
1, Churikov D.O.
11Yuri Gagarin State Technical University of Saratov, Saratov, Russia
2National Research Center “Kurchatov Institute”, Moscow, Russia
Email: irinka_7_@mail.ru, nikolaj.bekrenev@yandex.ru, danilachurikov@mail.ru
A study was conducted to examine changes in strength and stiffness under three-point bending, tension, and impact loads of carbon fiber reinforced plastic (CFRP) produced using FDM technology after contact ultrasonic treatment. It was found that final ultrasonic treatment at 22 and 44 kHz increased stresses under three-point bending by 18.7 % and 8.6 %, respectively. Tensile stresses in the test specimens increased by an average of 12 % and 11 %, respectively, compared to the control specimens. Keywords: carbon fiber, polyetheretherketone, physical and mechanical properties, shock absorption.
- E.N. Lapteva, O.V. Nazarochkina, Mashinostr. Komp'yut. Tekhnol., No. 5, 11 (2019) (in Russian). DOI: 10.24108/0519.0001500
- I. Gibson, D. Rosen, B. Stucker, Additive Manufacturing Technologies. 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing (Springer, New York, 2014)
- Microwave processing of materials (National Academy Press, Washington, 1994). DOI: 10.17226/2266
- Yu.S. Arkhangel'skii, Spravochnaya kniga po SVCh-elektrotermii (Nauchn. Kniga, Saratov, 2011) (in Russian)
- I.V. Zlobina, N.V. Bekrenev, Izv. Sarat. Univ. Nov. Ser. Fiz., 22 (2), 158 (2022) (in Russian). DOI: 10.18500/1817-3020-2022-22-2-158-169
- V.N. Studentsov, I.V. Pyataev, Russ. J. Appl. Chem., 87 (3), 352 (2014). DOI: 10.1134/S1070427214030173
- I.V. Zlobina, N.V. Bekrenev, Sposob ispytaniya polimernykh kompozitsionnykh materialov na soprotivlenie povrezhdeniyu pri udarnom vozdeistvii, RF Patent 2730055 (applied on February 14, 2020; published on August 14, 2020) (in Russian)
- V.M. Chernyshev, Dempfirovanie kolebanii mekhanicheskikh sistem pokrytiyami iz polimernykh materialov (Nauka, M., 2009) (in Russian)
- A.I. Markov, Ul'trazvukovoe rezanie trudnoobrabatyvaemykh materialov (Mashinostroenie, M., 1968) (in Russian)
Подсчитывается количество просмотров абстрактов ("html" на диаграммах) и полных версий статей ("pdf"). Просмотры с одинаковых IP-адресов засчитываются, если происходят с интервалом не менее 2-х часов.
Дата начала обработки статистических данных - 27 января 2016 г.